Power Gear Leveling Jack Reset Guide

power gear leveling jack reset

Power Gear Leveling Jack Reset: A Simple Guide to Fix Your RV's Stability

Is your RV wobbling on uneven ground? Do you feel uneasy driving down the highway with your camper swaying side to side? If so, you may need to reset your power gear leveling jacks.

Leveling jacks are designed to stabilize your RV by extending and retracting to level it on uneven surfaces. However, over time, they can become misaligned or malfunction, causing your RV to lose stability. Resetting the jacks can resolve these issues and ensure a comfortable and safe travel experience.

How to Reset Power Gear Leveling Jacks

Resetting power gear leveling jacks is a straightforward process that can be done in a few simple steps:

  1. Shut off the power to the jacks using the electrical panel.
  2. Locate the manual override valve on the jacks.
  3. Open the valve to release any pressure in the system.
  4. Turn the power back on.
  5. Use the control panel to extend and retract the jacks several times.
  6. Close the manual override valve.

Benefits of Resetting Power Gear Leveling Jacks

Resetting your power gear leveling jacks offers several benefits:

  • Improved Stability: Properly aligned jacks provide a secure foundation for your RV, reducing sway and vibrations.
  • Increased Safety: Stable RVs are less likely to roll or tip over, enhancing your safety on the road.
  • Enhanced Comfort: A level RV provides a more pleasant and comfortable living space.
  • Extended Jack Lifespan: Regular resetting can prevent premature wear and malfunction of the jacks, extending their lifespan.

In conclusion, resetting power gear leveling jacks is an essential maintenance task that can improve the stability, safety, and comfort of your RV travels. By following these simple steps, you can ensure that your leveling jacks are functioning properly and providing the necessary support for your camper.

Power Gear Leveling Jack Reset: A Comprehensive Guide

1. Identifying the Need for a Reset

If you're experiencing issues with your RV's power gear leveling jacks, such as uneven leveling or error messages, you may need to perform a reset. This process involves re-initializing the system to restore its proper functionality.

2. Safety Precautions

Before attempting a reset, ensure your RV is parked on a level surface, engage the parking brake, and disconnect from any electrical sources. Also, wear appropriate safety gear such as gloves and eye protection.

3. Manual Reset Procedure

For manual reset, locate the control panel inside your RV and press and hold the "Reset" button for 5 seconds. The system will beep once the reset is complete. If there's no "Reset" button, try holding down the "Auto Level" button for 10 seconds.

4. Using the Circuit Breaker

If the manual reset doesn't work, check the RV's electrical panel for a tripped circuit breaker labeled "Leveling Jacks." Reset the breaker by flipping it to the "Off" position and then back to "On."

5. Resetting via the Fuse Panel

In some cases, a blown fuse may cause the leveling jacks to malfunction. Inspect the RV's fuse panel and locate the fuse labeled "Leveling Jacks." If it's blown, replace it with a new fuse of the same amperage.

6. Re-Calibrating the Leveling Jacks

After performing a reset, it's recommended to re-calibrate the leveling jacks to ensure accurate leveling. Refer to your RV's user manual for the specific calibration procedure.

7. Troubleshooting Common Issues

If you're still experiencing issues with your leveling jacks after a reset, check for any loose connections, damaged wires, or faulty sensors. It's advisable to consult a qualified RV technician for assistance if you encounter persistent problems.

8. Maintenance and Prevention

To maintain optimal performance of your power gear leveling jacks, consider the following preventive measures:

  • Keep the jacks clean and lubricated.
  • Inspect the jacks regularly for any signs of damage or wear.
  • Avoid overloading the jacks with excessive weight.
  • If possible, store your RV in a sheltered location to minimize exposure to the elements.

9. Troubleshooting Tips

Here are some additional tips for troubleshooting power gear leveling jack problems:

  • Check for any error codes on the control panel.
  • Refer to your RV's user manual for specific troubleshooting instructions.
  • If you're unable to resolve the issue yourself, contact the manufacturer of the leveling jacks for assistance.

10. Conclusion

Performing a power gear leveling jack reset can help resolve issues and restore the proper functioning of your RV's leveling system. By following the steps outlined above, you can safely and effectively reset your leveling jacks, ensuring a smooth and stable camping experience.

.