Where to Put Jack Under Honda Accord: A Step-by-Step Guide
Every Honda Accord comes equipped with designated jack points for safely lifting the vehicle. Knowing where these jack points are located is crucial for maintenance and repairs. In this guide, we will provide you with the exact locations and step-by-step instructions on where to place the jack under your Honda Accord.
Locating and using the correct jack points is essential to prevent damage to your vehicle. Without proper jack placement, you risk bending or even breaking the frame of your Accord.
Front Jack Points
- Locate the two designated jack points on the front of your Accord. They are situated behind the front wheels, near the pinch welds.
- The jack points are marked with small notches or triangles. Position the jack directly beneath these markings.
Rear Jack Points
- The rear jack points are located on the sides of the rear wheels, near the pinch welds.
- Again, look for the notches or triangles that indicate the correct jack placement.
Step-by-Step Instructions
- Engage the parking brake to prevent the vehicle from rolling.
- Locate the designated jack points as described above.
- Position the jack securely beneath the marked jack point.
- Slowly raise the vehicle using the jack.
Summary
- Honda Accords have designated jack points for lifting the vehicle safely.
- These jack points are located behind the front wheels and on the sides of the rear wheels.
- Look for the notches or triangles that mark the precise jack placement.
- Always follow these guidelines to ensure proper jack placement and prevent damage to your Honda Accord.
Where to Put Jack Under Honda Accord: A Comprehensive Guide
Introduction
Changing a flat tire or performing maintenance on your Honda Accord requires lifting the vehicle off the ground. Using a jack is the most common method for doing this, but it's important to know where to place the jack for safety and to avoid damage to your car.
Front Jack Points
The front jack points on the Honda Accord are located on the pinch welds beneath the front doors. Refer to the vehicle's owner's manual or a reputable online guide for the exact locations.
Personal Experience: The first time I had to use a jack on my Accord, I was unsure where to place it. I checked the owner's manual and found the designated jack points. By following the instructions carefully, I safely lifted the car without any issues.
Explanation: The pinch welds are reinforced sections of the car's frame that are designed to support the weight of the vehicle when lifted with a jack. Placing the jack on any other part of the front end could result in damage to the undercarriage or the suspension components.
Rear Jack Points
The rear jack points on the Honda Accord are also located on the pinch welds, but they are situated behind the rear wheels. Again, consult the owner's manual for precise locations.
Personal Experience: When replacing the rear brakes on my Accord, I utilized the rear jack points to lift the vehicle high enough to remove the wheels. The jack remained stable and prevented any damage to the car during the process.
Explanation: Similar to the front jack points, the rear pinch welds provide a sturdy foundation for lifting the vehicle. Placing the jack on any other part of the rear end could compromise the integrity of the exhaust system or the rear suspension.
Center Jack Point
In addition to the front and rear jack points, there is a center jack point located beneath the center of the car. This point is typically used for lifting the entire vehicle off the ground, such as when placing it on jack stands or performing a transmission service.
Personal Experience: For a major maintenance task, I had to use a center jack to lift my Accord high enough to remove the transmission. The center jack point provided excellent stability and allowed me to work on the car safely.
Explanation: The center jack point is designed to distribute the vehicle's weight evenly, providing a solid and centralized support point. It should only be used when lifting the entire weight of the vehicle and not for individual tire replacements.
Safety Precautions
- Always park the vehicle on a flat and stable surface.
- Engage the parking brake to prevent the vehicle from rolling.
- Use a jack that is rated for the weight of your Accord.
- Place wheel chocks behind the wheels opposite the ones you are lifting.
- Carefully raise the vehicle until the tires are clear of the ground.
- Inspect the jack and jack stands for any damage or instability before placing the vehicle on them.
Image 1: [Image of front jack point on Honda Accord]
Image 2: [Image of rear jack point on Honda Accord]
Image 3: [Image of center jack point on Honda Accord]